Micro fittings connect sections of 1/8 or 1/4 in. distribution tubing or 1/4 in. Dura Flo™ JR dripline. The barbed fittings fit inside drip tubing and anchor into place.
Key Features
Single-barbed design inserts into drip tubing and anchors into place
Designed to work with standard drip irrigation water pressures up to 50 PSI
Works with NDS drip irrigation products and distribution tubing or dripline
1/8 in. size available as a coupling; 1/4 in. size available as a coupling, adapter, elbow, or tee.
Applications
Use fittings to set up a new drip irrigation system, expand an existing system, or make repairs
Use for subsurface or on grade installation; works with tubing or dripline to transport water to trees shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
As part of a complete drip irrigation system, the micro fitting connects 1/8 or 1/4 in. tubing or 1/4 in. dripline together, connects to other drip irrigation components to transport water to the area to be irrigated
Installation & Maintenance
Insert barbed fitting into tubing as far as it will go; barb will hold the product in place
Periodically check for leaks or damage and repair as needed; recommended operating pressure for most fittings is up to 50 PSI
Materials & Sustainability
Fitting made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent fading and cracking
Drip irrigation can reduce water usage by up to 70% compared to conventional sprinkler irrigation when used properly; for most drip irrigation products, water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion