By NORMA Group

By NORMA Group

Hydro-Flo™ Jet Assembly with 2-Piece Jet, 360-Degree Fan Spray, 0.06 in. Nozzle, 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake, 100-Pack

SKU:

TA 24-1F6

Save time and effort setting up your drip system with the Hydro-Flo™ Jet Assembly. The all-in-one component features a 2-piece jet, 12 in. stake, and 24 in. of supply tubing with 1/4 in. barbed inlet, preassembled for a quicker install. Insert 1/4 in. barbed inlet into a punched hole in supply tubing, position stake as desired, and you’re done. The fan spray jet emits water in a 360° full-circle pattern and features a 0.06 nozzle for a spray that discharges up to 28 GPH and radius that reaches up to 11 ft. (at 30 PSI). The Hydro-Flo™ Jet Assembly is made of polyethylene, vinyl, and ABS plastic, treated with UV inhibitors to prevent fading and cracking

Where to Buy Find a Contractor
Applications
  • Releases water with a fan spray in a full-circle pattern (360°) for low-volume, overhead irrigation
  • Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
  • As part of a complete drip irrigation system, the jet-spray delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
Features
  • Two-piece jet, 24 in. tubing with 1/4 in. barbed inlet, and 12 in. stake come preassembled
  • Fan spray jet releases water in a full-circle pattern (360°)
  • Nozzle size of 0.06 discharges water up to 28 GPH with radius of up to 11 ft. (at 30 PSI)