By NORMA Group

Compression Elbow, 700 Series, 2-Pack

SKU:

CEL 700/02

The 5/8 in. Compression Elbow adds a 90° bend and connects two sections of 5/8 in. supply tubing or dripline together (NDS CEL 700)

Top down view of the Compression Elbow (NDS CEL 700)

Alternate view of the compression elbow (NDS CEL 700)

Close up view of the black compression end of the elbow (NDS CEL 700)

Form a 90° turn in your irrigation system using the Compression Elbow 700 Series. This El fitting connects two sections of supply tubing or dripline (0.680 in. to 0.704 in. OD) at an angle to prevent kinking. Tubing is inserted into the compression ring, where an internal barb compresses the tube and holds it in place, creating a watertight connection. This compression fitting is made of ABS plastic treated with UV inhibitors to prevent fading and cracking. Use fittings to set up a new drip irrigation system, expand an existing system, or make repairs.

Where to Buy Find a Contractor

Applications

Adds a 90º corner in drip system and connects two sections of supply tubing or dripline together
Use for subsurface or on grade installation; works with tubing or dripline to transport water to trees shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
As part of a complete drip irrigation system, the compression elbow connects two sections of tubing or dripline and creates a 90° bend; also connects tubing to other drip irrigation parts to transport water to the area to be irrigated

Features

Adds a 90º corner; creates a watertight connection; has an internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI
Works with NDS products and other products with compatible connection type