By NORMA Group

PVC Compression Ring, 1/2 in. Slip X 710 Series Adapter, 100-Pack

SKU:

CA 710

Front Side View of the 0.710 in. X 1/2 in. Slip PVC Compression Adapter connects tubing to PVC pipe (NDS CA 710)

Closeup of the underside of the 710 Series PVC Compression Ring (NDS CA 710)

Solvent weld the PVC Compression Ring into a 1/2 in. PVC slip fitting (sold separately) to form a leakproof compression adapter. Use the compression ring attached to the slip to adapt 1/2 in. pipe to 710 Series supply tubing or dripline (0.704 in. to 0.710 in. OD). Tubing is inserted into the blue compression ring, where an internal barb compresses into the tube to hold it in place. Compression ring is made of PVC and treated with UV inhibitors to prevent fading and cracking.

Where to Buy Find a Contractor

Applications

Compression ring can be solvent welded to 1/2 in. PVC slip fitting (not included) to create a leakproof compression adapter that makes the transition from 1/2 in. pipe to 700 Series supply tubing or dripline tubing (0.704 in. to 0.710 in. OD)
Use for subsurface or on grade installation; can be buried or left out on the surface in any weather; works in a variety of areas, from small to large, flat or sloped
As part of a complete drip irrigation system, the PVC Compression Ring is attached to a 1/2 in. PVC slip fitting to enable transition from 1/2 in. pipe to 710 Series tubing or dripline to transport water to the area to be irrigated

Features

Creates a compression adapter when attached to 1/2 in. PVC slip fitting to transition from pipe to supply tubing or dripline
Compression ring creates a watertight connection; internal barb that compresses the inserted tubing to hold it in place; unlike a barbed fitting, the tubing is not stretched out to connect to the fitting
Designed to work with standard drip irrigation water pressures up to 50 PSI