HDPE Corrugated End Cap, 6 in.

SKU:

6C06

Side view of the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Side View of the opening of the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Closeup of the outer side of the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Closeup of the ridges of the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Closeup of the wording on the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Closeup of the branding of the 6 in. High-Density Polyethylene Corrugated End Cap (NDS 6C06)

Seal the end of 6 in. single-wall corrugated pipe with the HDPE Corrugated End Cap. The drain fitting is also used to close off the 6 in. slotted pipe in the EZflow® Gravel-Free French Drain System (EZ-1501F). This cap is used to seal off the end of pipe to stop the flow of water. The corrugated end cap is made of high-density polyethylene (HDPE). Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi.

Where to Buy Find a Contractor

Applications

Connects to 6 in. single-wall corrugated pipe or 6 in. slotted pipe in the EZflow® Gravel-Free French Drain System (EZ-1501F) to seal the end of pipe
Use at end of pipe to close off the flow of water
As part of a complete drainage system, the HDPE corrugated end cap closes the end of 6 in. single-wall corrugated pipe or the EZflow® Gravel-Free French Drain System with 6 in. Slotted Pipe & Engineered Aggregate (EZ-1501F) to stop the flow of water