By NORMA Group

PVC S&D Sanitary Tee, 3 in. Hub X Hub X Hub

SKU:

3P09

The NDS 3 inch PVC sanitary tee (NDS 3P09) is not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665

Add a 90° sweep to a 3 in. sewer and drain (S&D) pipe run with the 3 in. PVC Sanitary Tee. Also known as a San Tee or Sweep Tee, this fitting is used for less turbulent flow and to provide an easier clean out of the pipeline. The San Tee connects to pipe and also to select drainage products such as channel drain outlets, drainage grates, and pop-up emitters. This tee is used to add an intersection to the pipeline, connecting three pipes of the same type and diameter size. The sanitary tee fitting is made of polyvinyl chloride (PVC) and makes Hub X Hub X Hub solvent-weld connections. Meets applicable ASTM standards. For use in non-pressurized underground sewer and drainage applications; maximum working pressure of 5 psi.

Where to Buy Find a Contractor

Applications

Use for less turbulent flow and easier clean out of the pipeline by adding a sweeping “T” intersection to 3 in. Sewer & Drain (S&D) pipe in non-pressurized drainage and sewer piping systems
Adds a sweeping “T” intersection from select drain products that make 3 in. S&D connections such as channel drain outlets, drainage grates, and pop-up emitters to 3 in. S&D pipe
As part of a complete drainage system, the PVC tee adds a sweeping “T” intersection to the pipeline as it connects three pipes of the same type and diameter size together; it also adds an intersection connecting drainage product to drain pipe